Audemars Piguet Royal Oak Concept Supersonnerie Watch

The Audemars Piguet Royal Oak concept Supersonnerie uses a more familiar Swiss power station shell shape and updates the internal workings, brand new and great. Cheap Audemars Piguet Replica Watches is more concerned about any other aspect of this watch, that is, its sound quality is obtained from the Sonnerie composition, which is why this watch gets its name. This is not the first time Audemars Piguet has released a watch in this way. Back in 2014, they launched the first episode of the Audemars Piguet Royal Oak Concept Acoustics Study, which we reviewed on aBlogtoWatch (you can check out David Bredan’s detailed analysis here). With the Audemars Piguet Royal Oak concept Supersonnerie, which can be released in just one year, the brand feels they have produced a one-minute repeater with a very clear, long-lasting tone.

Like the first iteration of this project, Audemars Piguet Royal Oak Concept Supersonnerie emphasizes sound quality and clarity. Traditionally, when a one-minute repeater sounds, you can hear the buzz of the background. It comes from a component called a governor that is continuously running during the chime process. With this watch, this important part runs almost in absolute silence, reducing the interference of the bell itself. In fact, Audemars Piguet Replica Watches is very keen to develop this soundable watch, they have applied for three patents on the Audemars Piguet Royal Oak concept Supersonnerie.

Audemars Piguet referred to their watch sound research project since 2006. In cooperation with the EPFL (Federal Institute of Technology in Lausanne), Audemars Piguet Replica invested heavily in sound measurement equipment to help their passionate watchmaking teams, artisans, technicians and academics conduct research. One of the main challenges they face is overcoming the noise spread caused by the rugged enclosure, which is necessary to achieve good water resistance. The Audemars Piguet Royal Oak Concept Supersonnerie watch has a cruising range of 20 meters. Considering the need to adjust this watch, the endurance of this watch is truly impressive.

When Fake Audemars Piguet Watches released the original version of the watch, they spent some time consulting a “respected scholar at the Geneva Conservatory of Music” to ensure that the sound was not only clear but also pleasing. It must be pointed out that since the density of the titanium case is lower than that of gold and platinum, this sound can be much less resistant to propagation on the wall than other common watch materials.

The Audemars Piguet Royal Oak Concept Supersonnerie watch features a hand-made movement called the Calibre 2937. Considering its function, it is surprisingly thin at 8.28 mm. The watch operates at 21600 vph and has 43 gems and 478 components. The most basic power reserve is 42 hours. The black ceramic locking crown works well with black ceramic and titanium pushers for complications as needed. Audemars Piguet Royal Oak Concept Supersonnerie watch, black rubber strap, titanium folding strap. In addition to the mirrored sonnerie watch, this watch is also the home of the tourbillon chronograph, which has a central sweeping hand and a 30-minute counter that can be found at 3 o’clock. Each minute is indicated by a sweet double-headed pointer that rotates about the central axis, and the color hint of the pointer corresponds to the text on the dial.

I am already a fan of this concept case and its unique aesthetics, so I liked it very much from the start. It seems that Swiss Audemars Piguet Watches is likely to continue to study this field, no doubt they will redouble their efforts. Having said that, the Audemars Piguet Royal Oak concept Supersonnerie is priced at $597,400.

Audemars Piguet Royal Oak Sea Diver Chronograph Watch

There are some watches that you might feel and seem to be there all the time. The Audemars Piguet Royal Oak Sea Diver Chronograph works very well and is a natural extension of the diver’s collection. For me, it is definitely such a watch. A few weeks ago at SIHH 2016, Cheap Audemars Piguet Replica Watches finally enhanced their “ROO Diver” by adding timing functions – originally released at SIHH 2010. After all, you will find that the brand took six years to make the first major major update to the series. To make up for the long wait, the manufacturer based in Le Paz, France, has launched four different colors. This is our practice.

In 2016, the luxury watch industry (and many of its peers) is still at a stage where new watchmakers launching colorful new products may be widely considered a “controversial move”. I can’t help but point out the many and more pressing industry issues we’ve discussed in detail here. These issues should come earlier, not just because a brand has launched several color watches and is afraid of “losing it.”

Of course, do you want to wear a bright yellow (or green, orange, or blue) watch or not sure about your personal preferences, but suddenly find that the collection of colors used by the brand “controversial” or “polarization” may watch -snobbery is unnecessary too much.

When approaching with a more open mind, the new Audemars Piguet Replica Royal Oak Sea Diver Timer may surprise you with a mix of bright colors and ap-standard craftsmanship – I can feel it really fun, even It was the snowy Geneva in mid-January. Although color schemes that are considered successful or unsuccessful are likely to depend on personal taste, only when the brand gives up the usual – and to a large extent, is not very appealing – black and silver color matching, and dare to innovate I will praise it. At this time, an overwhelmingly large number of high-end brands focused most of their attention on “heritage”, “tribute”, “remembrance day”, and “antique”, seeing some fun, no regrets, and boldness. As a new ROO diver chronograph, it is a truly refreshing experience…even, technically, it is based on the 1972 design.

This chronograph version brings a modern approach to the next level. At the time of release, there is actually no real conservative color choice for the new Audemars Piguet Royal Oak Offshore Diver chronograph: you can be in bright yellow, Vibrant orange, dark blue (yellow), or arrogant green (fact: the latter has no official color code, and this is only reserved for Geneva boutiques – serious).

The new dive chronograph retains many of the original design elements of the original submersible. The inner rotating flange ring can be adjusted by adjusting the ceramic crown at 10 o’clock position, so it is the Audemars Piguet Replica Watches logo and the thick “Super Tapestry” dialing mode, well defined neighborhood, until today, still works well overall Theme and look watch. Huge hour and minute hands still exist, applying exponents with multi-faceted edges – in closer observations, you’ll find plenty of high-end detail to keep the new divers in line with the quality you expect from the Associated Press.

The Royal Oak’s sea shell is as impressive as ever: it is built like a tank, made of precision machined and polished steel, 42 mm wide and 14.75 mm thick. ROO has reached a fascinating balance and looks like the darling of weapon-grade equipment and fine jewelry. Take a look at the two photos above: it’s thick, blocky, but in a strangely cool way, it’s certainly beyond the top.

Create some of these urgently needed flanked forces, thin, polished and beveled edges, along the side of the crown protector bridge, on one side of the case and the lugs, and also the edges of the borders all work in tandem to give a high-end look, otherwise It’s easy to drop a steel brush and it’s hard to move.

It was a relief to see Fake Audemars Piguet Watches not being shy about using a transparent back cover and using the 300-meter waterproof rating as an excuse to hide things inside. Therefore, you will find that the new diving chronograph turned over is the impressive Audemars Piguet caliber 3124/3841 – a manufacturing base with a dubo-depraz timing module at the top. Yes, the Associated Press has always insisted on this modular structure, and Vacheron Constantin has finally updated its overseas business (being here), Patek Philippe’s Nautilus (here here) also has its own interior Timed exercise, but the price is much higher.

An easy way to discover and distinguish modular chronograph movements from an integrated promoter and crown is to check the situation: if the chronograph scribes are not on the same level, Crown, but further, you know there is a module installed At the base of the sport. Just look at photo 2 above and there will be an experience of “I will never see it once I see it.” This little detail may or may not be a problem for you – although, it can be said that the higher the price, the more the internal movement is expected.

Still, the details are still there, with a beautifully crafted, pure gold winding rotor with embossed AP initials and a coat arm. Thanks to the clever use of the eight structural screws and the contours of the sapphire windows, this action seems to be better than the actual effect – after all, this is a small chassis with a diameter of 29.92 mm and a thickness of 7.16 mm, mounted on a 42 mm In the chassis.

There are a total of 364 parts and 59 jewels in the Best Audemars Piguet Replica Watches caliber 3124/3841, running at 3 Hz for about 50 hours without winding – expecting a more modern 4 Hz will be in a new, fully internal timing caliber… well, later . Features include hours, minutes, and running seconds at 3 and 30 minutes with a counter at 9.

In all cases, the Royal Oak Sea Diver Timer attached to the Audemars Piguet is a rubber strap that matches the color of the dial. The shoulder strap feels very comfortable from the first moment of attention – no unnecessary stiffness or abrasive feel soft material, in my experience, the colorful rubber band is often easy to dirty, with bright yellow enamel Slight dirt and show its edge band. Although there is no ready-made new diving chronograph with a watch, I would love to see these brighter dials with stainless steel straps, as this will make the dials more prominent.

As I said at the outset, the new dive timer is a complement to a successful collection, and it should have been around for a while now – the Associated Press just spent their time and has released it now. Although we are seeing more and more big brands phasing out and updating their latest models more and more frequently, this release tells me that before Audemars Piguet launched a fully integrated internal timing campaign, we needed Wait a while.

The lack of aristocratic chronograph movements may be some, and the steep price of the diver’s chronograph with the Audemars Piguet Royal Oak’s $27,900 is indeed a high barrier, in nearly twice the non-chronograph diver campaign when it debuts…but This points out that the quality of the Audemars Pipa process, the quality of the case is almost matched by other people even at this price point, the colorful and eye-catching Royal Oak atmosphere is likely to be enough for many to believe that the most cool, perhaps the most “polarization” One of the Associated Presses will be a deal worthy of acquisition.

Audemars Piguet Royal Oak Concept Supersonnerie Tourbillon Chronograph Watch Hands-on Operation

In the past few years, Cheap Audemars Piguet Replica Watches has created some of the most technically interesting watches in their Royal Oak concept collection. Last year, they showed the Royal Oak Concept Timer, a highly sophisticated timer with three column wheels that measure continuous turns. Earlier this year, they launched the same sophisticated Royal Oak concept Supersonnerie Tourbillon chronograph watch, this one-minute relay watch shows Odmars Piquet’s obsession with sound clarity and quality.

Of course, if you look at the picture and tell you the wonderful sound of this watch and there is no video for you to hear, it is too cruel. Audemars Piguet Replica Royal Oak concept table supersonerie Tourbillon timepiece was developed by Audemars Piguet for 8 years, the goal is to create the most amazing watch. The minor complications of repeaters are often considered to be the most difficult, and… well, the production is complicated – imagine how hard it is to create a repeater from scratch. The next thing to remember is that Audemars Piguet not only wants to create a new extension watch, they also want to create the best extension watch.

Now, Audemars Piguet’s “best” means they are working hard to create the clearest, clearest sound in any one minute repeater. The brand pointed out the three achievements of this watch, I will briefly introduce it. First, the unique preparation of the steel used to make the raft structure allows the watchmaker to more accurately and easily adjust and hone the pitch, pitch and harmony of the transponder per minute. Second, the way this situation is constructed minimizes the amount of sound absorption and maximizes the amplification. I will discuss the “soundboard” technology further later. Finally, the impact regulator was redesigned to act as a shock absorber to minimize impact noise.

One of the most important components of a one-minute repeater watch is this because it is responsible for amplifying the sound. It is often said that gold is the best material because it produces a richer sound, but the Odamas Piquet Royal Oak concept table chooses titanium. Titanium is a very light and strong metal whose low density allows sound to pass with less resistance. If you have any questions about this, you only need to look at the foreign supercars and their titanium exhaust. Titanium is also used elsewhere in the watch to improve the quality of the sound, but more is later.

The use of titanium also means that although the watch is large in size, 44 mm wide and 16.5 mm thick, it is still light and comfortable. Due to its unique aesthetics, the case design immediately identified the watch as the concept of the Royal Oak, nothing else.

There is no doubt that this box has reached a perfect high standard with contrasting finishing. The frame has a mirror-polished edge with a satin finish on the top that complements the exposed 18k white gold screw head. The cabinet is sandblasted with a smooth surface and perfectly matched to the shiny border. The huge crown and timer are made of ceramic.

The black satin dial section is boned to show the inner workings of the watch. The hour and minute hands are made of 18K white gold and some are skeletons. However, because they are quite thick, it is not too difficult to say the time, but the legibility is not ideal. In other words, this is not the real hand is the focus. The timer’s stopwatch pointer is bright yellow to provide contrast with the black dial.

Finally, the personal minute mark and the 30 minute time mark are rendered yellow and white at 3 o’clock to provide maximum contrast and legibility. The 3:30 minute counter is also unique because it uses a retrograde indicator to show the run time. Finally, six o’clock is the tourbillon.

Exercise is where the magic happens. It is obviously internal, it is calibre 2937. Manually wound, it has an amazing 478 components, 3Hz beats, and a 42-hour energy reserve. Like all high-end timing actions, it has a column wheel and a side clutch.

However, what is unusual about it is that it has two flaws. Instead of attaching the plaque to the mobile disk, they attached it to the “sound board.” “Basically, it is a film made of a special copper alloy that covers the back of the movement, is screwed there, and forms a waterproof seal. This explains why the Royal Oak Concept Supersonnerie Tourbillon chronograph watch can be obtained. The 20-meter waterproof rating, which may not sound like normal observers, is not true, and considering the complex construction of the watch, the 20 meters is actually quite impressive.

When the hammer hits the cymbal, the membrane vibrates, just like the guitar’s soundboard, which greatly magnifies the humming sound. In addition, the actual titanium box back is raised slightly to cover the film and has an aperture along the edge to allow sound to escape. This produces the loudest relay table we have ever heard. Interestingly, the sound of the watch on the wrist seems to be bigger!

At the end of the day, the Fake Audemars Piguet Watches Royal Oak concept watch Supersonnerie Tourbillon chronograph is another successful demonstration of the brand’s stunning technical know-how and unique design. This is a thorough modern interpretation of one of the oldest complications in the history of timepieces. We can see that it has also been thoroughly improved in the case of the Audemars Piguet Replica Watches Royal Oak concept watch Supersonnerie Tourbillon.

If you think that it will not be cheap, you are right. Although the Olds Oaks Concept Supersonnerie Tourbillon Chronograph is not a limited edition, its price is as high as $597,400.